Resolve® High Traffic - Crisp Linen

Make carpet cleaning easier!

Product Features

  • Removes 5x more dirt than vacuming alone
  • Eliminates odors
  • Newer looking carpets
  • Protects against dirt and futures soils
  • Deodorizes the carpet with a refreshing clean scent.

Pack Contents: 22 OZ

Product Description

Resolve® High Traffic™ Foam has a unique cleaning and protective formula to help make cleaning large areas of carpet and upholstery easier. Safely cleans and deodorizes large carpet areas and upholstery. It will leave your carpet with a refreshing clean scent that you'll love. Try this with Resolve® Easy Clean Pro Carpet Brush.

Before Cleaning:
- Vacuum carpet thoroughly to remove loose dirt. Test a small, hidden area for colorfastness and examine when dry. If color is affected do not use.
- For upholstery, look for manufacturer's cleanability code tag. Use on fabrics coded "WS" or "W". If coded "X" or "S", do not use. Not recommended for use on velvet, silk, vinyl, or leather. Do not use Resolve Easy Clean Pro on any surface other than carpets.

1. Shake can well. Hold can upside down about 2 feet above carpet. Spray foam evenly over a 3 foot square area.
2. Work the foam into carpet in two directions using a damp, colorfast mop.
3. Repeat steps 1 & 2 until the entire area is cleaned.
4. When dry, vacuum thoroughly to remove dried foam and loosened dirt.

1. Remove spray cap from Resolve High Traffic Foam 22oz can. Shake the can vigorously before each use. If the can is already in the gadget, remove and shake again. 2. Insert can into the gadget and rotate clockwise until it gently clicks into the locked position. 3. To remove the can, rotate counter-clockwise into the unlocked position and gently pull upwards. 4. Pull trigger to dispense foam, then brush the foam into the carpet. When dry, vacuum thoroughly to remove dried foam and loosened dirt. 5. Replace spray cap to can standard use.

1. Bolt wet soils with a clean absorbent cloth.
2. Shake can well and generously apply directly to stain from a distance of 4-6 inches. Allow foam to absorb into stain for 3 minutes.
3. Gently blot area with a clean, damp, colorfast sponge or cloth. Rub gently if required. Do not overwet fabrics. Hint: To avoid rings, clean entire section where soil occurs.
4. Rinse sponge or cloth and repeat as necessary. Allow fabric to dry thoroughly before use.
5. Only use spray cap to dispense foam for upholstery cleaning.

Caution: Contents under pressure. Read precautions on back. Keep out of reach of children and pets. Caution: May cause eye irritation. Contents under pressure. Do not spray towards face. Avoid contact with eyes and skin. Container may explode if heated. Do not puncture or incinerate container. Do not expose to heat or store temperatures above 120 degrees F, as the container may burst. First Aid: If in eyes, immediately rinse eyes with plenty of water. Remove contact lenses and continue to rinse for at least 15 minutes. If irritation persists, get medical attention. When using Resolve Easy Clean Pro Carpet Brush, direct aerosol away from face when loading the device and replacing the spray cap to can.